Chetra TG 222

Chetra TG 222

Request Call Back
Find Spare Parts

Advantages
Characteristics
Information materials
Characteristics
Model YaMZ-238 ND7-1 QSC8,3-C245 84CTA-2V
Volume, l 14,86 8,3 8,4
Power, kWt/hp 174/235 180/245 180/245
Torque, Nm (rpm) 1108 (1200-1400) 1162 (1500) 1260 (1400)
Transmission
Type Hydromechanic
Gearbox Planetary
1-st speed, forward/backward drive, km/h 3,9/5,1
2-nd speed, forward/backward drive, km/h 6,9/9
3-rd speed, forward/backward drive, km/h 11,1/14,2
Shift control Electro-hydraulic
Torque converter Three-element, single stage
Transformation ratio, Ko 2,9
Undercarriage
Suspension Rigid, with crossbar
Track rollers (each side), pcs 8
Carrier rollers (each side), pcs 2
Track chain type Assembled, with single grouser shoes and grease retainer
Link pitch, mm 215,9
No. of shoes (each side), pcs 43
Grouser height, mm 70
Shoe width, mm 610
Base, mm 3115
Ground contact area, m2 3,8
Ground pressure, kgf/cm2 1,05
Pipelaying equipment
Lift capacity at boom reach 2.5 m, t 21
Lift capacity at boom reach 1.22 m, t 44,2
Hook drive system Block and tackle system
Mechanical advantage of the hoisting block and tackle 4
Mechanical advantage of the boom block and tackle 4
Hook lifting height at boom reach 1.5 m, m 5,2/7,7
Hook lifting (lowering) speed, m/min 8-24
Boom length, m 6,5/9
Boom weight, kg 1160/1430
Winch type Two drums, hydraulic drive
Winch drum diameter x width, mm 400 х 290
Hook rope diameter x length 19,5 mm х 46 m
Boom rope diameter x length 19,5 mm х 46 m
Counterweight control Hydraulic
Counterweight plates, pcs 4
Counterweight plate weight, kg 1050
Counterweight + frame total weight, kg  
Boom and hook drums drive and control
Drive type Hydraulic
Lubrication system type Independent
Hydraulic motors control By distributor, simultaneous rotation of both drums at any speed and in any direction
Hydraulic filtration system Disposable paper filter
Automatic winch brake when engine stops Yes
Pipelayer weight, kg 32420 31850 31850

 

  • Equipped with Cummins engines, Trier 3/ Stage III, Stage III A certified;
  • solide aluminium radiators by AKG, Germany;
  • Air-to-air aftercoolers and fuel coolers increase engine efficiency and decrease emissions;
  • Additional fuel filters "Fleetquard" provide water separation and fuel heating. Filter condition can be easily checked through the transparent cap;
  • "Eberspacher" heater can automatically warm up engine and cab. It guarantees easy start, long engine life and low emissions;
  • All pipelayers are equipped with load-sensitive (LS) hydraulic systems, and also can be equipped with LUDV system (combined with BOSCH REXROTH hydraulics only) providing the pipelayer with the possibility to perform simultaneous operations at any speed or load;
  • Modular design of all parts;
  • Track and carrier rollers and wheels with life-long lubrication and self-tensioning seals of the "double-cone" type;
  • Hydromechanic transmission with planetary gearbox and two-speed final drive, efficient diesel;
  • Hydro mounted cab with insulated glass units, air conditioner/heater, wipers, sunshades and audio system. Cab is also equipped with small refrigerator for water and drinks;
  • ROPS-FOPS;
  • Hook and boom lift restrainers, loaded disc brakes to avoid the fall of the cargo;
  • Standard equipment:
  • Sound signal;
  • Back hitch;
  • Front towing device;
  • Engine and transmission protection;
  • Articulated radiator enclosure;
  • AC generator, 85 А;
  • 2 batteries, 12V, 190 Ah (24 V).