Chetra TG 511

Request Call Back
Find Spare Parts

Information materials

Volume, l  
Power, kWt/hp  
Torque, Nm (rpm)  
2219 (1200-1400)  
Type Hydromechanic
Gearbox Planetary
1-st speed, forward/backward drive, km/h 4,2/5,1
2-nd speed, forward/backward drive, km/h 7,7/9,2
3-rd speed, forward/backward drive, km/h 12,7/15,1
Shift control Electro-hydraulic
Torque converter Single stage
Transformation ratio, Ko  
Suspension Rigid, with crossbar
Track rollers (each side), pcs 8
Carrier rollers (each side), pcs 2
Track chain type Assembled, with single grouser shoes and grease retainer
Link pitch, mm 250
No. of shoes (each side), pcs 47
Grouser height, mm 90
Shoe width, mm 1000 or 1100 (left) / 800 (right)
Base, mm 4150
Ground contact area, m2  
Ground pressure, kgf/cm2 0,86
Pipelaying equipment
Lift capacity at boom reach 2.5 m, t 51
Lift capacity at boom reach 1.22 m, t 104,5
Hook drive system Block and tackle system
Mechanical advantage of the hoisting block and tackle 8
Mechanical advantage of the boom block and tackle 6
Hook lifting height at boom reach 1.5 m, m 8
Hook lifting (lowering) speed, m/min 4,5-16
Boom length, m 8,9
Boom weight, kg 2508
Winch type Two drums, hydraulic drive
Winch drum diameter x width, mm 400 х 335
Hook rope diameter x length 21 mm х 100 m
Boom rope diameter x length 21 mm х 82 m
Counterweight control Hydraulic
Counterweight plates, pcs  
Counterweight plate weight, kg  
Counterweight + frame total weight, kg 14180
Boom and hook drums drive and control
Drive type Hydraulic
Lubrication system type Independent
Hydraulic motors control By distributor, simultaneous rotation of both drums at any speed and in any direction
Hydraulic filtration system Disposable paper filter
Automatic winch brake when engine stops Yes
Pipelayer weight, kg  





  • Equipped with Cummins engines, Trier 3/ Stage III, Stage III A certified;
  • solide aluminium radiators by AKG, Germany;
  • Air-to-air aftercoolers and fuel coolers increase engine efficiency and decrease emissions;
  • Additional fuel filters "Fleetquard" provide water separation and fuel heating. Filter condition can be easily checked through the transparent cap;
  • "Eberspacher" heater can automatically warm up engine and cab. It guarantees easy start, long engine life and low emissions;
  • All pipelayers are equipped with load-sensitive (LS) hydraulic systems, and also can be equipped with LUDV system (combined with BOSCH REXROTH hydraulics only) providing the pipelayer with the possibility to perform simultaneous operations at any speed or load;
  • Modular design of all parts;
  • Track and carrier rollers and wheels with life-long lubrication and self-tensioning seals of the "double-cone" type;
  • Hydromechanic transmission with planetary gearbox and two-speed final drive, efficient diesel;
  • Hydro mounted cab with insulated glass units, air conditioner/heater, wipers, sunshades and audio system. Cab is also equipped with small refrigerator for water and drinks;
  • Hook and boom lift restrainers, loaded disc brakes to avoid the fall of the cargo;
  • Standard equipment:
  • Sound signal;
  • Back hitch;
  • Front towing device;
  • Engine and transmission protection;
  • Articulated radiator enclosure;
  • AC generator, 85 А;
  • 2 batteries, 12V, 190 Ah (24 V).